How to mount the LCD screen:
The LCD screen mount is very easy to construct.
I used a cheap universal wall mount plate for LCD's that holds the LCD thru VESA standard screw distances. My LCD had 75x75mm screw hole distances but the wall mount plate has even bigger Vesa standards and you can mount virtually a screen of any size up to 25''. With only four bolts supporting the LCD its easy to remove it to do repairs to the motion cockpit without the fear of damaging the LCD.
The nice thing about the mount I designed is that you can easily unbolt it and move the LCD's position more to the front or more higher or even to set the degrees of inclination to be equal to your eyes height.
The LCD mount frame is also useful to wrap on it the cables of the LCD and the game controller of even fix on it a button panel simular to the one real plane cockpits has. Don't mind the wheel controller on these photos, I just used them as reference that any type of game controller can be mounted on the cockpit like for example a flight yoke!
The LCD mount construction is held by the joyrider inside cockpit by using four small angles used holding shelf. Again you can adjust the general angle position for the whole LCD mount construction by choosing the proper hole to bolt it on these angles.
